ALLEY BUMP

Alley bumps were developed specifically to address speeding and cut-through traffic in city alleyways, slowing cars to 1-5 mph. Constructed from 100% recycled tires, the flexible design conforms to the contour of virtually any road surface. Pre-drilled for anchoring spikes or lag bolts, alley bumps are simple to install and can be easily removed for storage or relocation.

The bumps are available in 4’ and 6’ lengths, including end caps to protect the speed bump ends and vehicles. The channeled bottom helps facilitate drainage as well as cover cabling or piping. They are designed to withstand extreme weather and stress, and are resistant to moisture, oil, temperature variations, and ultraviolet light. They will not warp, crack, chip, or rot, and are covered by a 3 year warranty on the product and a 1 year warranty on the tape (under normal usage).

• AVAILABLE SIZES
  • 4’ (L) x 12” (W) x 2 ¼” (H)
  • 6’ (L) x 12” (W) x 2 ¼” (H)
  • End Caps are available and can be purchased separately:
    • End Cap Dimensions: 6”(L) x 12” (W) x 2 ¼” (H)
  
  
• AVAILABLE COLORS
  • Black with Durable Reflective Yellow Tape
  
  
• SPECIFICATIONS & INSTALLATION

EASY RIDER SPEED BUMP

The Easy Rider rubber speed bump reduces vehicle speeds to 2-5 mph, making parking lots safer for pedestrians and motorists. Constructed from 100% recycled tires, GNR speed bumps are preformed to ensure a smooth, safe ride. The channeled bottom helps facilitate drainage as well as cover cabling or piping. The Easy Rider’s flexible design conforms to the contour of virtually any road surface and is available in 4’ and 6’ lengths. End caps can also be purchased to protect the speed bump ends and vehicles. The Easy Rider can be installed for temporary or permanent use, and is covered by a 3 year warranty on the product and a 1 year warranty on the tape (under normal usage).

• AVAILABLE SIZES
  • 4’ (L) x 12” (W) x 2 ¼” (H)
  • 6’ (L) x 12” (W) x 2 ¼” (H)
  
  
• AVAILABLE COLORS
  • Black with Durable Reflective Yellow Tape
  
  
• SPECIFICATIONS & INSTALLATION

PARK IT PARKING CURB

The rubber Park-It car stop is used in parking lots to effectively stop cars pulling into parking spots. Unlike asphalt or plastic curbs, which necessitate frequent replacements, Park-It parking curbs are more forgiving of vehicles, sturdier, and do not break or need to be replaced. Constructed of 100% recycled rubber, GNR’s Park-It car stops include molded, highly reflective tape (in yellow or white) to ensure visibility and pedestrian safety.

The rubber stops are pre-drilled with holes and shipped with anchoring spikes or lag bolts. They are available in 6’, 4’, 3’, and 22” lengths, are lightweight, and can easily be installed by one person (the weight per unit for the 6’ curb is 34 lbs, 22.5 lbs for the 4’ curb, 17 lbs for the 3’ curb, and 10 lbs for the 22” curb). The flexible rubber design conforms to the contour of uneven road surfaces, and can also be used as curbing to create traffic circles and curb extensions. Park-It parking curbs are covered by a 3 year warranty on the product, and a 1 year warranty on the tape (under normal usage).

• AVAILABLE SIZES
  • 22” (L) x 12” (W) x 2 ¼” (H)
  • 3’ (L) x 12” (W) x 2 ¼” (H)
  • 4’ (L) x 12” (W) x 2 ¼” (H)
  • 6’ (L) x 12” (W) x 2 ¼” (H)
  
  
• AVAILABLE COLORS
  • Black with Durable Reflective White Parrellelograms
  • Black with Durable Reflective Yellow Parrellelograms
  
  
• SPECIFICATIONS & INSTALLATION

SAFETY RIDER MINI-HUMP

The Safety Rider rubber mini hump is a unique modular traffic calming device designed to slow traffic to 10-15 mph while maintaining a continuous traffic flow. Unlike asphalt humps, our mini hums are preformed to provide a uniform, consistent profile, and a smooth, safe ride. Constructed from 100% recycled tires, the interlocking tongue and groove system allows the humps to be linked together to cover the width of any roadway. Plastic shields are inserted into existing holes and the units are bolted down to keep the product from shifting.

Our mini hump is lightweight, simple to install, and does not require any road closures. End caps are also available to provide a safe and protective finish to the ends of the hump. Ideal for slowing traffic in school parking lots, crossings, playground areas, hospitals, parking facilities, and anywhere a slow traffic flow is required. The Safety Rider can be easily removed for storage or relocation and is covered by a 3 year warranty on the product and a 1 year warranty on the tape (under normal usage).

• AVAILABLE SIZES
  • As required using sections 19.5”(L) x 35.5”(W) x 2.25”(H) in size.
  • End Caps are of similar weight and size.
  
  
• AVAILABLE COLORS
  • Black with Durable Reflective White Inmoulded Tape
  • Black with Durable Reflective Yellow Inmoulded Tape
  
  
• SPECIFICATIONS & INSTALLATION